Removing The Fbu From The Fbu Holder - Fujitsu PRIMERGY TX100 S3 Maintenance Manual

Hide thumbs Also See for PRIMERGY TX100 S3:

Table of Contents

Expansion cards and backup units

Removing the FBU from the FBU holder

Figure 107: Disconnecting the FBU adapter cable from the FBU

Ê Press down on the locking latch on the FBU cable (see close-up) and

disconnect the FBU adapter cable.

Figure 108: Removing the FBU from the FBU holder

Ê At a slight angle, slide the FBU from under the retaining brackets of the FBU

holder and remove it.

Upgrade and Maintenance Manual