Removing The Tpm - Fujitsu PRIMERGY TX100 S3 Maintenance Manual

Ê Disable TPM in the system board BIOS. Proceed as follows:
Ê Switch on or restart your server.
Ê As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
Ê Select the Advanced menu.
Ê Select the Trusted Computing submenu.
Ê Set the TPM Support and TPM State settings to Disabled.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the "System Board D3009 BIOS Setup Utility"
reference manual available online at
(EMEA market) or
(Japanese market) or from the ServerView Suite DVD 2 supplied with
your PRIMERGY server.
Ê Shut down the server as described in section
page 42.
Ê Remove the AC power cord from the cable tie and disconnect it from the
system as described in section
Ê Open the side cover as described in section
page 45.
Ê Remove the HDD cage as described in section
on page 61.

14.2.2.3 Removing the TPM

Ê Remove the system board as described in section
board" on page
Ê Lay the system board on a soft, antistatic surface with its component side
facing down.
TX100 S3
http://jp.fujitsu.com/platform/server/primergy/manual/
"Disconnecting power cord" on page
306.
Upgrade and Maintenance Manual
System board and components
http://manuals.ts.fujitsu.com
"Shutting down the server" on
"Removing the side cover" on
"Removing the HDD cage"
"Removing the system
43.
299