Preliminary Steps - Fujitsu PRIMERGY TX100 S3 Maintenance Manual

Front panel and external connectors

13.1.2 Preliminary steps

Before replacing the front panel cable, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Shut down the server as described in section
page 42.
Ê Remove the AC power cord from the cable tie and disconnect it from the
system as described in section
Ê Bring the server to its horizontal position.
Ê Open the side cover as described in section
page 45.
Ê Remove the HDD cage as described in section
on page 61.
Ê Remove all accessible drives as described in section
drives" on page
Ê Remove the front cover as described in section
on page 51.
274
69.
"Disconnecting power cord" on page
257.
Upgrade and Maintenance Manual
"Disabling BitLocker
"Shutting down the server" on
"Removing the side cover" on
"Removing the HDD cage"
"Removing accessible
"Removing the front cover"
43.
TX100 S3