Removing The On/Off Button; Removing The Hdd Activity Led - Fujitsu PRIMERGY TX100 S3 Maintenance Manual

Hide thumbs Also See for PRIMERGY TX100 S3:

Table of Contents

13.1.3 Removing the On/Off button

Figure 184: Removing the On/Off button

Ê Press the two retaining clips together and push the On/Off button backwards

in the chassis.

Note the orientation of the On/Off button. If it is installed in the other

direction, it does not work properly.

Figure 185: Removing the HDD activity LED

Ê Push apart the two latches (1) and pull the LED inwards the chassis (2).

Upgrade and Maintenance Manual

Front panel and external connectors