5.2
Completing the maintenance task
5.2.1
Updating the system board BIOS
After replacing the system board, it is essential to upgrade the BIOS to the latest
version.
The latest BIOS versions are available from the Fujitsu support internet pages
at:
http://ts.fujitsu.com/support/
http://jp.fujitsu.com/platform/server/primergy/downloads/
I
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from BIOS updates.
BIOS recovery procedure
I
For the Japanese market, follow the instructions provided separately.
Ê Prepare a USB stick with the following files:
– Update tool
– Startup.nsh (which will execute the update tool)
– BIOS image file for update (16 MB with header information)
Ê Ensure that the server has been shut down and disconnected from the
mains as described in sections
Ê Open the side cover as described in section
page
44.
TX100 S3
(EMEA market)
"Shutting down the server" on page
Upgrade and Maintenance Manual
Basic software procedures
(Japanese market)
"Opening the server" on
42.
73