Commands
Command
Description
COT+/-
Adjusts the contrast.
Examples
Add one to the contrast data:
COT+
Subtract one from the contrast data:
COT-
BRI+/- –Brightness
Adjusts the projector's brightness.
Commands
Command
Description
BRI+/-
Adjusts the brightness.
Examples
Add one to the brightness data:
BRI+
Subtract one from the brightness data:
BRI-
COTP–Color Temp.
Switches the projector's color temperature.
Commands
Command
Description
COTP <value>
Switches the projector's color temperature.
Examples
Sets the Color temp to high:
COTP 0
APS Series Technical Reference
020-103593-01 Rev. 1 (07-2022)
Copyright
2022 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Serial API commands
Value
—
Value
—
Value
0 = High
1 = Middle
2 = Low
15