Ddd-Disable Dual-Link Dvi Inputs; Def-Factory Defaults - Christie Boxer 30 Technical Reference

Examples
Set the color space to RGB (full range) irrespective of which channel is selected:
(CSP 1)
Set the projector to always automatically detect the color space:
(CSP 0)
DDD–Disable Dual-Link DVI Inputs
Enables or disables the secondary DVI receiver on all Dual-Link DVI cards.
Commands
Command Description
DDD <0 | 1> Enables or disables the secondary DVI
receiver on Dual-Link DVI cards. This
command is only available if video
electronics are on. (Saved value)
Examples
Enable Dual-Link support:
(DDD 0)
Disable Dual-Link support:
(DDD 1)
DEF–Factory Defaults
Resets Boxer 30 to its factory default values.
Note the following about this command:
• Performing this command while the power is on does not reset the Lamp Selection value while
in limited mode.
• Resets the network settings to be DHCP enabled.
• Deletes all user profiles, warps, and blends.
Commands
Command Description
DEF 111 Restores all settings to the factory defaults.
To prevent accidental use of this command, the number
111 must follow the command.
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 = Enables Dual-Link support (Default)
1 = Disables Dual-Link support
Values
111
24