Ddd-Disable Dual-Link Dvi Inputs; Def-Factory Defaults; Dmx-Dmx/Artnet - Christie Crimson Technical Reference

DDD–Disable Dual-Link DVI Inputs
Enables or disables the secondary DVI receiver on all Dual-Link DVI cards.
Commands
Command Description
DDD <0 | 1> Enables or disables the secondary DVI
receiver on Dual-Link DVI cards. This
command is only available if video
electronics are on. (Saved value)
DEF–Factory Defaults
Resets Crimson to its factory default values.
Note the following about this command:
• Resets the network settings to be DHCP enabled.
• Deletes all user profiles, warps, and blends.
Commands
Command Description
DEF 111 Restores all settings to the factory defaults.
To prevent accidental use of this command, the number
111 must follow the command.
Examples
Reset Crimson to factory defaults:
(DEF 111)
DMX–DMX/ArtNet
Configure DMX/Art-Net settings.
Commands
Command Description
DMX+CHAN <value> Sets the base channel for Art-Net.
DMX+ENBL <value> Enables or disables the Art-Net interface.
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
0 = Enables Dual-Link support (Default)
1 = Disables Dual-Link support
Values
111
Values
1 to 488
1 (Default)
0 = Disables the Art-Net interface (Default)
1 = Enables the Art-Net interface
22