Setting Up The Adf Paper Chute (Feeder) - Fujitsu SP-1130Ne Operator's Manual

Setting Up the ADF Paper Chute (Feeder)

Documents loaded in the ADF paper chute (feeder) are fed into the ADF one by one when scanning starts.
Using the chute extensions 1 and 2 as described in the following procedure will feed documents smoothly.
1
Pull out the chute extension 1.
HINT
Make sure you hold the ADF paper chute (feeder) while pulling out the chute extension 1.
2
Pull out the chute extension 2.
HINT
Make sure you hold the ADF paper chute (feeder) while pulling out the chute extension 2.
31
Basic Operations