Conditions For Using The Carrier Sheet - Fujitsu S1100 Operator's Manual

■ Conditions for Using the Carrier Sheet

The Carrier Sheet (sold separately) is a sheet designed to transport documents through the
ScanSnap.
You can scan documents that are larger than A4/Letter size, photographs and clippings.
Conditions for documents that can be scanned using the optional Carrier Sheet are as follows:
CAUTION
Do not use a damaged Carrier Sheet because it may damage or cause the scanner to
malfunction.
Be careful not to cut your finger on the edge of the Carrier Sheet.
Eject method (*1)
Paper type
Paper weight
Paper size
*1: For details about how to eject documents, refer to
*2: Fold in half to scan.
With the output guide closed
Documents that cannot be fed directly into the ScanSnap
Up to 127 g/m² (up to 34 lb)
Up to 63.5 g/m² (17 lb) (when scanning documents folded in half)
Carrier Sheet size (216 × 297 mm)
A3 (297 × 420 mm) (*2)
A4 (210 × 297 mm)
A5 (148 × 210 mm)
A6 (105 × 148 mm)
B4 (257 × 364mm) (*2)
B5 (JIS) (182 × 257 mm)
B6 (JIS) (128 × 182 mm)
Post card (100 × 148 mm)
Business card (90 × 55 mm, 55 × 90 mm)
Letter (8.5 × 11 in. (216 × 279.4 mm))
11 × 17 in (279.4 × 431.8 mm) (*2)
Custom size
Width : 25.4 to 216 mm (1 to 8.5 in.)
Length : 25.4 to 297 mm (1 to 11.69 in.)
Do not stain, or cut the end with a black & white pattern because the Carrier Sheet will not be
recognized properly.
Do not place the Carrier Sheet upside down. Otherwise, a paper jam may occur and damage
the Carrier Sheet and the document inside.
Do not leave your document inside the Carrier Sheet for a long time. Otherwise, the ink on
the document may be transferred onto the Carrier Sheet.
To avoid deformation, do not use or leave the Carrier Sheet in high temperature places such
as under direct sunlight or near a heating apparatus for a long time.
Do not fold or pull the Carrier Sheet.
To avoid deformation, store the Carrier Sheet on a flat surface without any weight on it.
Paper jams may occur when several small size documents such as photographs and
postcards are placed inside the Carrier Sheet to be scanned at once. It is recommended that
you scan such documents one at a time.
"Output Guide" (page
30
Documents for Scanning
22).