Positioning - Fujitsu 6010N - fi - Document Scanner Operator's Manual

6.6.2 Positioning

Set the print position of the scanned data.
The setting selected here will be used every time the user prints a document.
1. Press the [Positioning] button.
The "Positioning" screen appears.
2. Select the print positioning of the data.
By default, this is "Center".
Button
Center
Scaling
Shrink to Fit Uses the center point of the area available for print-
ing as a control point.
Available Area
for Printing
100% Uses the center point of the sheet as a control
point.
Available Area
for Printing
fi-6010N Network Scanner Operator's Guide
6.6 Printing the Scanned Data
Control Point
Center
Control Point
Center
Control Point
6
349