Updating The Driver (For Windows  Xp); The Following Device Manager Window Opens, And The Device Name Is; Displayed Under [Imaging Devices]; Select The Device Name, Right-Click The Device Icon, And Select The [Properties] Menu Item From The Pop-Up Menu - Fujitsu TWAIN 32 Manual

3.2.8 Updating the driver (for Windows
If a driver of previous version has been installed, the latest driver for the system may not
be installed by following the procedure given in Section 3.2.4. If this occurs, update the
driver by following the procedure below.
1. Connect the scanner to be used to the computer. Then, turn on the scanner.
Lastly, turn on the personal computer.
Note
In case of the SCSI connection, be sure to turn on the power in this
sequence. Otherwise, the scanner may not be detected. (In case of the
USB connection, the scanner can be detected, if it is connected after
activating the OS.)
If multiple scanners are to be connected, connect and turn on scanners one
at a time. Then, turn on the personal computer. Repeat the remainder of
this installation procedure for each scanner.
2. Log in to Windows
Note
The user must log in with administrator authority.
For information on logging in with the proper authority, contact the system
administrator.
3. Right-click the [My Computer] icon and select the properties menu item, or
double-click the [System] icon on the [Control] panel.
4. The [System Properties] dialog box is displayed. Click the [Device Manager]
button of the [Hardware] tab.

5. The following device manager window opens, and the device name is

displayed under [Imaging devices].

6. Select the device name, right-click the device icon, and select the [Properties]
menu item from the pop-up menu.

XP)

.
44
BACK TO MAIN PAGE