Setting Up A Firewall For The Central Admin Server; Configuring The Scanner Settings For Central Admin Management - Fujitsu iScanner fi-6010N Operator's Manual

5.3.3 Setting up a Firewall for the Central Admin Server

This section describes how firewall settings for the Central Admin Server.
Set the following port number for communication in the Central Admin Server, to enable manage-
ment by the Central Admin Console.
Scanner ⇒ Central Admin Server
Central Admin Console ⇒ Central Admin Server
For details about setting a firewall, refer to the manual for the relevant firewall.

5.3.4 Configuring the Scanner Settings for Central Admin Management

This section describes the scanner settings environment.
The following settings for connecting a scanner to the Central Admin Server are required to enable
management by the Central Admin Console.
• "Admin Network" screen from the "Network Settings" tab
For more details, refer to
• "Central Admin Server" screen from the "Network Settings" tab
For more details, refer to
5.3 Pre-settings for Using Central Admin Console
From/To
"4.7.2 Setting the Admin Network" (page
"4.7.3 Setting a Central Admin Server" (page
Protocol
HTTP/ Port number set for scanner
HTTPS communication.
(TCP)
HTTP/ Port number set for Central
HTTPS Admin communication.
(TCP)
fi-6010N Network Scanner Operator's Guide
Port Number
78).
80).
205
5