[Cm90] Multiline Terminal/Sn610 Attcon/Add-On Module Key Assignment - NEC NEAX 2000 IVS Command Manual

[CM8A]
COMMAND CODE
90
MAT
1. FUNCTION:
This command assigns functions to programmable keys on a Multiline Terminal, an ATTCON, a DESK
CON or an Add-On Module.
2. PRECAUTION:
(1) "Primary Extension" must always be assigned to any key on each Multiline Terminal or Add-On
Module (for ETJ-24DS-1).
(2) For assignment of a key on an Add-On Module, assignment should be performed after data assign-
ment of CM98.
(3) This command is included in MAT mode menu "A2" (D
Pattern [COM02]) and "E8" (Add-On Module Keys [COM02]).
(4) Twenty-five keys on the Add-on Module can be assigned as Station/Trunk Appearances.
Multiline Terminal/SN610 ATTCON/Add-On Module Key Assignment
TITLE:
MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT
ND-45669 (E)
term
Key [COM01], "C1" (SN610 ATT Key
CM90
CHAPTER 3
Page 267
Revision 2.0