Set The 'Color Mode - Oce ColorWave 600 User Manual

Set the 'Color mode'

Set the 'Color mode'
Introduction
Use the Océ Express WebTools to set the printer's default setting for the 'Color mode'
for a print job.
Note:
If you set a value for this setting in your print job submission application (Océ Windows
printer driver or Océ Publisher Select) and the Océ job ticket is enabled, the value of
this setting will overrule the default value.
You can choose one of the following options.
• 'Grayscale'
The system only prints grayscale. The print speed increases in the grayscale mode.
• 'Color'
The Océ ColorWave 600 prints all the colors.
Before you begin
This setting is editable for the Key operator or Power user.
How to set the color mode
Click 'Preferences'- 'Print job defaults'.
1.
Click 'Edit' in the 'Basic' bar or click the value of the 'Color mode' setting.
2.
Select 'Grayscale' if the print productivity is the most important factor.
3.
Select 'Color' if the print quality is the most important factor.
4.
Note:
The color "black" also looks nicer when printed in the color mode 'Color'. In that case
all colors (cyan, magenta, yellow and black) are used to produce black, and not only black
toner.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
5.
316 Chapter 8 - Print quality and Print productivity
®