Set The 'Color Mode - Oce ColorWave 650 User Manual

Set the 'Color mode'

Introduction
Use the Océ Express WebTools to set the printer's default setting for the print job's
'Color mode'.
Note:
If you set a value for this setting in your print job submission application (Océ WPD
or Océ Publisher Select) and the Océ Job Ticket is enabled, the value of this setting will
overrule the default value.
You can choose one of the following options.
• 'Grayscale'
The system only prints grayscale. The print speed increases in the grayscale mode.
• 'Color'
The Océ ColorWave 650 Poster Printer prints every color.
Before you begin
This setting is editable for the Key operator or Power user.
How to set the color mode
Click 'Preferences' - 'Print job defaults'.
1.
Click 'Edit' in the 'Basic' bar or click the value of the 'Color mode' setting.
2.
Select 'Grayscale' to print in grayscale mode.
3.
Select 'Color' to print in color mode.
4.
Note:
The color black also comes out better when printed in 'Color mode'. In such cases, all
colors (cyan, magenta, yellow, and black) are used to produce black, and not only black
toner.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
5.
Chapter 8 - Print quality and Print productivity
Set the 'Color mode'
269