Jobs - Oce ColorWave 600 User Manual

Define the correct media for your jobs
Definition
To achieve optimal output quality, make sure that you load and define the correct media
type on the printer.
Make sure you define the correct media type for your job. Check if the media type (with
the correct media format) that you defined in your job is available on the printer.
#
When productivity with different media sizes is the most important requirement.
1 Load up to 6 media rolls on the printer with different media sizes and the
same media types.
2 Use the 'Landscape' orientation to print a job on a media size that is one size
smaller than the media defined on the system. For example, A1 prints in
landscape on A0 and A2 prints in landscape on A1. You are not required to
cut the media by hand.
3 Use the 'Auto rotate landscape' setting or the 'Auto rotate landscape with
additional 180° rotation' in the Océ Express WebTools or the job submission
tools to rotate the orientation automatically.
Note:
The above procedure is based on DIN media sizes. You can also use this procedure with
ANSI media sizes.
#
When productivity is the only important requirement.
1 Load and define two or more media rolls on the printer with the same media
sizes and the same media types.
Note:
When roll 1 is empty, the printer switches automatically to roll 2.
Chapter 7 - Manage media on the Océ ColorWave 600 printing system
Define the correct media for your jobs
307