Oce ColorWave 600 User Manual page 60

Run the installation wizard from the printer operator panel
Action
16 The printer will do the calibration automatically. You
do not need to keep this printed calibration chart.
17 The following message in the 'Home' screen is dis-
played:
'Ready to print'.
18 Continue with the following procedure:
'Complete the printer configuration in the Océ Express
WebTools' on page
60 Chapter 3 - Prepare the printing system for use and get started
Note:
The calibration will take a several minutes.
The printed output is lead through the slot
below the 'Top back cover' ('External output
(back)').
80.
Illustration