Oce ColorWave 600 User Manual page 134

Configure the network settings on the printer operator panel
Action
6 Select one of the following options.
• 'Auto detect (IPv4 only)'
Use the 'Scroll wheel' to select 'Auto detect (IPv4
only)' if the system must automatically detect your
network settings. Confirm your entry with the
'Confirmation key' above the 'Scroll wheel'.
Use the 'Upper right softkey' to go to next step and
continue with step 9.
• 'Manual'
Use the 'Scroll wheel' to select 'Manual' if you want
to configure the network settings manually. Con-
firm your entry with the 'Confirmation key' above
the 'Scroll wheel'.
Use the 'Upper right softkey' to go to the next step.
You must now first follow the procedure to enter
the network settings manually. (see
network settings manually' on page
7 The following message is displayed:
'Auto network discovery in progress'
8 The printer operator panel now displays the network
settings.
Record the IP address (for example, 134.188.26.173).
You need this IP address to access the 'Océ Express
WebTools' later in order to complete the printer con-
figuration.
Use the 'Upper right softkey' to finish the network in-
stallation procedure.
134 Chapter 4 - Configure the printing system
Illustration
'Configure the
61)