Oce ColorWave 600 User Manual page 275

Note:
Some media types (thick media) cannot be delivered to the 'Top Delivery Tray (TDT)'
or to the folder.
A media from a roll wider than 36 inches cannot be delivered to the folder.
Folded printout
When the 'Fold' option is available and selected, you can edit and manually select the
top of the folded packet.
The printout is automatically sent to the folder. The 'Delivery destination' is automati-
cally set to 'Folded delivery'
Note:
When the selected media and print settings do not allow the folded output to be delivered
with the legend on top of the folded packet, a warning message is displayed ('The legend
will not be on top of the folded packet.').
Depending on your printer and folder capabilities, set the fold options ('Fold type', 'Fold
method', 'Folded delivery', 'Change folded packet size', 'Binding strip'...)
When a combination of the settings generates conflicts, a message is displayed or the
combination is not available:
• 'The values of Fold type and Folded delivery are not compatible.'
• 'Reinforcement and Binding strip are not compatible.': 'Binding strip' is available
only when 'Fold and reinforce' is not set
• 'Reinforcement can be performed only with the DIN Fold method.': 'Fold and rein-
force' is available only when the 'Fold method' is DIN and the 'Fold type' is 'Full
fold'
• The length of the folded packet can be changed only when the 'Fold type' is 'Full fold'
See 'Fold a job' on page 276
For more information on the folding capabilities of your printer, refer to your printer
and folder documentation.
to get more details on how to adjust the folding settings.
Chapter 6 - The Océ Publisher Copy option
'Advanced' / 'Finishing' settings
275