Oce ColorWave 600 User Manual page 240

Set the default behaviour for the media selection
Note:
When the template refers to a media type that has been disabled on the printer controller,
an error message is displayed: 'The selected media type is not available.'
'Media size' selection
'Automatic media size selection'
When you activate the 'Automatic media size selection', you keep a 100% scale and you
can decide to cut the media to the image size or to a standard sheet size:
• 'Print at 1:1 scale and cut to image size' (default value)
• 'Print at 1:1 scale on a standard sheet size'
'Manual Media Size selection'
When you activate the 'Manual Media Size selection', you can:
#
'Scale to roll width'
'Scale to standard sheet
size'
Note:
When the template refers to a media size that has been disabled on the printer controller,
an error message is displayed: 'The selected media size is not available.'
'Media source' selection
When you add a file to a job, the system analyzes it and selects the most appropriate
media size for this document.
Choose whether it must:
#
'Select any enabled me-
dia'
'Select loaded media
only' (default)
When the media is not available:
240 Chapter 6 - The Océ Publisher Copy option
Scale the image to the width of a selected roll. Select the
roll size, taking the rotation settings into account.
Scale the image to fit a standard sheet size. Select the stan-
dard sheet size
The system picks the media from the list of all media en-
abled on the printer, even if the selected media is not
loaded on the printer.
The system picks the media from the list of media actually
loaded on the printer.