Configure The Regional Settings Of The Océ Colorwave 600 - Oce ColorWave 600 User Manual

Configure the regional settings of the Océ ColorWave 600
Purpose
The regional settings are configured during the installation of your Océ ColorWave 600.
If you want to change the initial configuration, you can do so in the 'Regional settings'.
Define the regional settings for the printer in the following order.
• 'First language' and 'Second language' of the printer operator panel
• 'Measurement unit'
• 'Time zone'
If you change the 'Time zone' you must first reboot the system, before you set the
'Current date and time'.
• 'Current date and time'
• 'Time format'
Note:
Every time you change the 'Measurement unit', the controller recalculates the values
from millimeter to inches and vice versa. If you reverse to the original value of this setting
a slight calculation difference can occur due to rounding differences.
How to define the regional settings
Select 'Preferences' - 'System properties'.
1.
Click 'Edit' in the 'Regional settings' bar or click the value of the setting you want to
2.
edit, for example 'First language'.
Modify the settings. You can choose between:
3.
• settings that are commonly used in the USA
• or settings that are commonly used in the rest of the world.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
4.
Configure the regional settings of the Océ ColorWave 600
Chapter 4 - Configure the printing system 119