Oce ColorWave 600 User Manual page 285

Note:
The media profiles for non-Océ media types are generic media profiles that give the best
possible result for a variety of the specified non-Océ media types. Because the media
profiles for Océ media types are fine-tuned for each specific media type, the quality of
the printed output will improve if you use Océ media types.
Click the media type, for example 'Océ Red Label 75gr', to check the media profile infor-
2.
mation.
Click the check box of a media profile and click the 'Enable' button in the toolbar above
3.
the media profiles list to make the media profile available on the printer operator panel
and in the print job submission applications. If you 'Disable' a media profile it will no
longer be available on the printer operator panel and in the print job submission applica-
tions.
Click 'Install' if you must upload a new media profile.
4.
Note:
You must download the new media profile from the Océ website before you can upload
the new media profile to the Océ ColorWave 600 embedded controller.
Click 'Install' if you must upload an updated media profile.
5.
Note:
You must download the updated media profile from the Océ website before you can upload
the updated media profile to the Océ ColorWave 600 embedded controller.
Click 'Remove' to remove a media type that is no longer supported.
6.
Note:
This action cannot be undone.
Result
If you are not sure that you have the latest version of the media profile, you can click the
hyperlink at the top of the page to access the media profiles download page on the corpo-
rate web site. Check the version of the media profile of your choice and if necessary update
the media profile in the Océ Express WebTools. More information about the media
profiles is available in the 'Work with media profiles' section of the on-line help.
•
Download a media profile from the web site, on page 286
•
Upload a media profile, on page 287
Chapter 7 - Manage media on the Océ ColorWave 600 printing system
Manage the media profiles
285