Set The 'Océ Print Assistant Behavior - Oce ColorWave 600 User Manual

Set the 'Océ Print Assistant Behavior'
Introduction
This setting is only used when the 'Print Setting' is set to 'Océ Print Assistant'.
The 'Océ Print Assistant' decides what print setting ('Production', 'Production Plus',
'Presentation' or 'Economy') must be used, based on the average toner coverage of the
print.
You can use the 'Océ Print Assistant Behavior' setting to influence the average toner
coverage limits that the 'Océ Print Assistant' uses to select one of the print settings. Low
coverage area files are printed via the fast 'Economy' print mode. High coverage area files
are printed via the 'Presentation' mode. The thresholds for switching from one mode to
another can be altered by the 'Océ Print Assistant Behavior'¹. In this way the 'Key oper-
ator' can fine-tune the 'Océ Print Assistant' to optimize further speed and quality to his
personal needs. The 'Océ Print Assistant' will be the default mode for the 'Océ Color-
®
Wave 600 Printer'.
¹ The number in the 'Océ Print Assistant Behavior' represents a position on a scale from
0 to 100. A higher number means an increased preference for print quality, a lower
number means an increased preference for print speed.
Before you begin
This setting is editable for the Key operator or Power user.
How to set the 'Océ Print Assistant Behavior'
Click 'Preferences' - 'System properties'.
1.
Click 'Edit' in the 'Printer properties' bar or click the value of the 'Oce Print Assistant
2.
Behavior' setting.
Set the 'Océ Print Assistant Slider' to '0' if the print productivity is the most important
3.
factor.
Set the 'Océ Print Assistant Slider' to '100' if the print quality is the most important
factor.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
4.
Set the 'Océ Print Assistant Behavior'
Chapter 8 - Print quality and Print productivity 323