Configure the network settings manually
Introduction
If you want configure the network settings manually, please contact your network admin-
istrator to get information about the network infrastructure and parameters.
How to configure the network settings manually
#
1
2
3
Action
If you want to enter the network settings manually,
use the 'Scroll wheel' to select 'Manual'. Confirm
your entry with the 'Confirmation key' above the
'Scroll wheel'.
Use the 'Upper right softkey' to go to the next
step.
The printer operator panel displays the following
message.
'You can now change network settings for:'
'Hostname'
'Suffix'
Press the 'Lower right softkey' to select the 'Ad-
vanced' tab.
Use the 'Scroll wheel' to select your network speed.
• 'Auto negotiation'
• '10 MBit FD'
• '10 MBit HD'
• '100 MBit FD'
• '100 MBit HD'
Confirm your entry with the 'Confirmation key'
above the 'Scroll wheel'
Use the 'Upper right softkey' to go to the next
step.
Chapter 3 - Prepare the printing system for use and get started
Configure the network settings manually
Illustration
61