Color Copy Settings; Mono-Color Mode - Oce OP30C Operation Manual

Section 5

1. Mono-color mode

By selecting one color between cyan, magenta, yellow, red, green and
blue, it is possible for you to make copies of that color, regardless of
the type of original being copied.
1 Press the Digital Editing key to light the corresponding
indicator.
Inch specifications
2 Use the M cursor or the N cursor key to select
"m Monocolor" ["m MONOCOLOUR"] and then press the
Enter key.
Inch specifications
Metric specifications
5-1

COLOR COPY SETTINGS

Metric specifications
3 Use the M cursor or the N cursor key to select the desired
color.
Inch specifications
Metric specifications
NOTE
Selection is possible between 6 colors: cyan, magenta, yellow, red,
green and blue.
4 Press the Enter key.
Inch specifications
5 Use the M cursor key to select "z Enter" and then press the
Enter key. The message display will return to the "Ready to
copy." screen and the selected color will be shown in the
display.
Metric specifications