Oce ColorWave 600 User Manual page 103

Note:
You must select both packages of the same version. It is not possible to update only one
package.
Click 'OK'.
6.
Note:
The system checks the current software version and displays a warning message if appli-
cable. A software upgrade or downgrade is not possible in all situations.
You must wait approximately 15 minutes while the software update files are transferred
to the printer. The progress bar, at the bottom of the page, indicates the progress. The
printer checks if the files are received correctly and if the update packages are valid. When
all files are transferred, a dialogue window appears.
Click 'OK'. A dialog window appears.
7.
When you click 'OK' a confirmation window with some warnings appears.
8.
Then a warning message is displayed.
The printer operator panel now displays the status 'Rebooting...'. During the reboot
procedure the new software is installed.
Attention:
Again, you must wait approximately 15 minutes. Do not touch anything.
The message in the window above disappears when the software update is finished.
9.
You can now click 'OK' to return to the Océ Express WebTools.
Result
Your software update is finished.
Note:
There is no specific user feedback on the result of the software update. Please check the
current software version of your system in the 'Support' - 'Update' tab.
Update the Océ ColorWave 600 software
Chapter 4 - Configure the printing system 103