Oce ColorWave 600 User Manual page 59

Action
12 The printer operator panel now displays the network
settings.
Record the IP address (for example, 134.188.26.173).
You need this IP address to access the 'Océ Express
WebTools' later in order to complete the printer con-
figuration.
Use the 'Upper right softkey' to finish the network in-
stallation procedure and to continue with the printer
installation.
13 The following message is displayed:
'Insert the toner cartridges'
Follow the steps as indicated in the wizard to complete
the installation of the printer.
For more information about specific steps please refer
to the following sections.
'Load or replace a toner cartridge' on page 64
'Replace the maintenance tray' on page 67
14 If the toner cartridges are placed correctly, the following
message is displayed:
'Warming up...'.
This procedure takes several minutes.
15 After warming up, open media drawer 1.
'Load the supplied installation media on roll 1'
(see 'Load a media roll' on page
Note:
Only roll position 1 can be used for calibra-
tions. You must use a 42 inch media roll.
Note:
Use Océ 'Media' for reliable calibrations
(LFM090, 42 inch).
Chapter 3 - Prepare the printing system for use and get started
Run the installation wizard from the printer operator panel
74)
Illustration
59