Set the 'Network speed'
Introduction
Use the Océ Express WebTools to set 'Network speed' for your network adapter.
The list of values you can select depends on the type of network card.
Before you begin
This setting is editable for the System administrator or the Power user.
Attention:
Gigabit ethernet (1000 Mbit/s) is supported, but only by automatic detection.
How to set the 'Network speed'
Click 'Configuration' - 'Connectivity'.
1.
Click 'Edit' in the 'Network adapter' bar or click the value of the 'Network speed' setting.
2.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
3.
Set the 'Network speed'
Chapter 4 - Configure the printing system
129