Configure the network settings on the printer operator panel
Configure the network settings on the printer operator panel
When to do
When you have no connection to the Océ ColorWave 600 printer you cannot use the
Océ Express WebTools to edit the network settings. This situation can occur at first in-
stallation or when there is no network connection due to invalid network settings.
Before you begin
If you integrate the printer according to a network policy, contact your network admin-
istrator to get information about the network infrastructure and parameters.
As a network administrator, please refer to the Océ TDS/TCS Connectivity Manual
(available on CD delivered with your system) to get information about the different net-
work infrastructures and configurations.
How to configure the network settings on the printer operator panel
#
Action
1
In the 'Home' screen of the printer operator panel se-
lect 'System' with the lower left softkey.
2
Select 'Configuration' with the upper right softkey.
132
Chapter 4 - Configure the printing system
Illustration