Set The 'Network Duplex Mode - Oce ColorWave 600 User Manual

Set the 'Network duplex mode'

Set the 'Network duplex mode'
Introduction
Use the Océ Express WebTools to set 'Network duplex mode' for your network adapter.
The list of values you can select depends on the type of network card.
Before you begin
This setting is editable for the System administrator or Power user.
How to set the 'Network duplex mode'
Click 'Configuration' - 'Connectivity'.
1.
Click 'Edit' in the 'Network adapter' bar or click the value of the 'Network duplex mode'
2.
setting.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
3.
128 Chapter 4 - Configure the printing system