Set The 'Colour Mode - Oce ColorWave 650 User Manual

Set the 'Colour mode'

Set the 'Colour mode'
Introduction
Use the Océ Express WebTools to set the printer's default setting for the 'Colour mode'
for a print job.
Note:
If you set a value for this setting in your print job submission application (Océ Windows
printer driver or Océ Publisher Select) and the Océ job ticket is enabled, the value of
this setting will overrule the default value.
You can choose one of the following options.
• 'Grayscale'
The system only prints greyscale. The print speed increases in the greyscale mode.
• 'Colour'
The Océ ColorWave 650 prints all the colours.
Before you begin
This setting is editable for the Key operator or Power user.
How to set the colour mode
Click 'Preferences' - 'Print job defaults'.
1.
Click 'Edit' in the 'Basic' bar or click the value of the 'Colour mode' setting.
2.
Select 'Grayscale' to print in greyscale mode.
3.
Select 'Colour'to print in colour mode.
4.
Note:
The colour "black" also looks nicer when printed in the colour mode 'Colour'. In that
case all colours (cyan, magenta, yellow and black) can be used to produce black, and not
only black toner.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
5.
332 Chapter 8 - Print quality and Print productivity
®