Introduction
The installation procedure
Introduction
To install the printer and integrate the Océ ColorWave 600 system in your company
network you must follow four main steps.
• Run the installation wizard from the printer operator panel.
If you connect the network cable of your company network and you switch on your
Océ ColorWave 600 for the first time, an installation wizard starts automatically.
• Complete the printer configuration in the Océ Express WebTools (from a workstation).
• Configure the regional settings of the Océ ColorWave 600.
• Print the Customer Acceptance Test (CAT) demo print.
54
Chapter 3 - Prepare the printing system for use and get started