Oce ColorWave 600 User Manual page 58

Run the installation wizard from the printer operator panel
Action
9 The following message is displayed:
'This wizard assists you to connect the printer to the
network'.
Use the 'Upper right softkey' to go to the next step.
10 Select one of the following options.
• 'Auto detect (IPv4 only)'
Use the 'Scroll wheel' to select 'Auto detect (IPv4
only)' if the system must automatically detect your
network settings. Confirm your entry with the
'Confirmation key' above the 'Scroll wheel'.
Use the 'Upper right softkey' to go to next step and
continue with step 9.
• 'Manual'
Use the 'Scroll wheel' to select 'Manual' if you want
to configure the network settings manually. Con-
firm your entry with the 'Confirmation key' above
the 'Scroll wheel'.
Use the 'Upper right softkey' to go to the next step.
You must now first follow the procedure to enter
the network settings manually. (see
network settings manually' on page
11 / The following message is displayed:
B 'Auto network discovery in progress'
58 Chapter 3 - Prepare the printing system for use and get started
Illustration
'Configure the
61)