Oce ColorWave 600 User Manual page 56

Run the installation wizard from the printer operator panel
How to run the installation wizard
#
Action
1 If you connect the network cable to your company
network and you switch on your Océ ColorWave 600
for the first time, an installation wizard starts automat-
ically.
Use the 'Upper right softkey' to go to the next step.
2 Use the 'Scroll wheel' to select the correct language for
your printer user interface.
Use the 'Upper right softkey' to go to the next step.
3 Use the 'Scroll wheel' to confirm your language selec-
tion.
Use the 'Upper right softkey' to go to the next step.
4 Use the 'Numeric keys' to enter the serial number of
the printer. You can find the serial number behind the
'Front cover' on the right hand side.
Use the 'Upper right softkey' to go to the next step.
56 Chapter 3 - Prepare the printing system for use and get started
Note:
To change or replace the last digit, select the
'Red stop key' to delete the last digit.
Illustration