Oce ColorWave 600 User Manual page 47

Action
5 Move the Océ ColorWave 600
printer.
Note:
Be aware of the printer
working area.
6 Pull out the left 'Foot' [1] until
it touches the ground and locks
[2]. You should hear a click as it
locks.
Note:
If you do not hear a
click, place your foot on
the foot of the printer
[1] and at the same time
push gently against the
printer until you hear
the click.
7a Replace the 'Foot' covers. Place
the pin into the notch.
Chapter 3 - Prepare the printing system for use and get started
How to move the Océ ColorWave 600
Illustration
Pin:
47