Set the link speed and duplex mode
Set the link speed and duplex mode
Introduction
Use Océ Express WebTools to set the transmission speed and duplex mode for your network
adapter.
NOTE
The list of values you can select depends on the network card type.
Procedure
1. Open the [Preferences] - [Connectivity] tab.
2. Click [Edit] in the [Network] section, or click on the [Link speed and duplex mode] setting.
3. Select the value. [Automatic detection] is default.
4. Click [Ok] to confirm, or [Cancel] to reject your entries.
92
Chapter 5 - Configure the print system