Making Booklets, Etc. From Sheet Originals [Booklet Mode] (Only Available In Duplex Copiers) - Oce OP30C Operation Manual

14. Making booklets, etc. from sheet originals [Booklet mode] (Only available
in duplex copiers)
With this mode, you can use 1-sided or 2-sided originals to make
open-faced two-sided copies in such a way that the finished copies
can be stacked and folded into a booklet format.
NOTES
• This mode is only available in duplex copiers.
• If the number of originals is not a multiple of four, the last page(s) of
the copies will come out blank.
• 2-sided copies cannot be made automatically when paper is being
fed from the multi-bypass tray.
1 If "Right" is selected as the page sequence...
Copying will be performed so that the stacked and folded pages of
the finished copies read from right to left.
2 If "Left" is selected as the page sequence...
Copying will be performed so that the stacked and folded pages of
the finished copies read from left to right.
1 Press the Book Mode key to light the corresponding
indicator.
Inch specifications
2 Use the M cursor or the N cursor key to select "z Booklet"
and then press the Enter key.
Inch specifications
Metric specifications
Use the M cursor or the N cursor key to select "z Booklet"
3
again and then press the Enter key. The "Select original."
screen will appear.
Inch specifications
Metric specifications
Section 6 FUNCTIONS
Metric specifications
6-34