Media Type
You can select as the media type [Bond], [Vellum], or [Film]. The [Vellum] setting should be selected
when using tracing paper. The factory default setting is [Bond].
Procedure
1.
Press either the <Copy> key or select the [Copy] button on the [Menu] screen to display the [Copy]
screen.
2.
Select the [Bond], [Vellum], or [Film] button to specify the media type.
Note
When [Media Source] is selected, the media type loaded in the tray is automatically selected.
Output Format
The Output Format feature permits you to specify the media cut mode. The factory default setting is
[Synchronized].
Procedure
1.
Select the button that appears under [Output Format] at the lower right corner of the [Basic Copy]
tab.
2.
Select the media cut mode from the options which are displayed.
Xerox 6204 Wide Format Solution
User Guide
Copy
3-83