Removing A Registered Presence - Dukane 4A3610B Operation Manual

Removing a Registered Presence

ProCare 6000 Operation Manual
In systems equipped with IR location, presence is automatically removed when the staff
member IR badge is sensed in another location.
To remove a registered presence using a presence station, press the illuminated red, am-
ber, or green button on the station that corresponds to your registered staff level (Figure
4-4 on the preceding page). You may also press the System Monitor button on the station
(see Figure A-5 on page A-9) or press and hold CANCEL for 2 seconds (see Figure 4-1
on page 4-1). When you do, this happens:
The LED associated with the registered staff level extinguishes.
•
The associated corridor light extinguishes.
•
Staff presence is no longer registered at the base master and on the video display
•
(if present).
Registering Staff Presence
4-11