Assigning Base Masters, Staff, and Stations (MENU, 3)
Releasing Captured and Shared Base Masters (MENU, 3, 1, 3)
3-8
This menu selection allows you to release captured and shared base masters.
Note:
You cannot release your own base master if it is captured. The release must be
performed by the capturing base master.
Important:
Before releasing a captured or shared base master, notify the base master attendant
that coverage is being released to his/her responsibility. When a base master shares
coverage, both base masters must release the shared coverage.
1. Press MENU.
2. Press 3 to select Assignments = 3.
3. Press 1 to select Capture/Share = 1.
4. Press 3 to select Release Master = 3.
a. "Waiting for Data" appears briefly.
b. The base masters shared or captured by your base master appear in the display
window, followed by "UnCov" and the number of masters currently covered or
shared (1 of 2). See Figure 3-11. Press the VOL key to scroll the selections.
1000 UnCov
Figure 3-11: Releasing Captured or Shared Base Masters
c. If there are no shared or captured masters, "NoMaster Covered" appears.
5. Press *ANS when the base master to be released appears in the display window.
a. The selected base master is released. Press #CNCL to return to step 3 and release
another master.
b. When there are no shared or captured base masters, "NoMaster Covered"
appears.
6. Press #CNCL repeatedly to exit the menu and return to the normal display. If you do
not, the base master automatically exits the menu after a programmed interval.
of 2
1
ProCare 6000 Operation Manual