Call Cord Adapters
Model 570-303A Call Cord Adapter
Model 570-304 Call Cord Adapter
ProCare 6000 Operation Manual
Call cord adapters are connected to the patient station when call cords are needed in place
of or in parallel with the Dukane pillow speaker.
Use the 570-303A adapter when you need to con-
nect both a call cord and a pillow speaker to a
patient station. (This adapter can also be used with
a call cord only.)
This adapter accepts a common pushbutton call
cord, air activated call cord, or auxiliary monitor
device with a standard 1/4-inch (6.4 mm) diameter
plug.
If the adapter, its attached call cord, or its attached
pillow speaker is unplugged, a cord out call is
placed. To cancel the call, either press the CAN-
CEL button on the station (if the device is no
longer needed), or reinsert the device and press
CANCEL.
Use the 570-304 adapter when you need to con-
nect a call cord to a patient station in place of a
pillow speaker.
This adapter accepts a common pushbutton call
cord, air activated call cord, or auxiliary monitor
device with a standard 1/4-inch (6.4 mm) diameter
plug.
If the adapter or its attached call cord is un-
plugged from the station, a cord out call is placed.
To cancel the call, either press the CANCEL
button on the station (if the device is no longer
needed), or reinsert the device and press
CANCEL.
Call Cord Adapters
Figure 4-17: Call Cord Adapter
(Model 570-303A)
Figure 4-18: Call Cord Adapter
(Model 570-304)
4-25