Answering A Call From Any Station - Dukane 4A3610B Operation Manual

Answering a Call from Any Station

ProCare 6000 Operation Manual
You can answer calls placed from any station covered by your Telco card, regardless of
whether or not you are assigned to the station:
1. Lift the telephone handset.
2. Enter the Telco extension number. (See the extensions on page 5-1.) A basic
telephone ring and a beep confirm that you have accessed the Telco. (If the Telco is
in use you will hear a busy signal.)
3. Enter a series of zeroes (the number of zeroes was configured at system installation).
For your reference, record the number of zeroes here: ______________________
You are connected to the highest priority unanswered call.
4. Talk to the person through the handset.
5. To end your telephone session, press the pound (#) key twice to disconnect from the
Telco. A brief warble tone confirms disconnection.
—CAUTION—
You must press the pound (#) key TWICE to disconnect from the Telco. If you do
not, the Telco will be unusable until it times out.
Note:
If your facility has the newer Telco card (Model 110-3628B) and a PBX that supports the
Call Party Disconnect feature, you do not need to press the pound (#) key twice. You can
simply hang up the phone.
Answering a Call
5-5