The "OwnerOut" Message
ProCare 6000 Operation Manual
If another base master fails, you will see the "OwnerOut" message at your base master
every time you:
Change the priority of a station that is covered by the failed master.
•
Change the primary or alternate staff assignment of a station covered by the failed
•
master.
Obtain coverage of a swing station from the failed master.
•
Assign a pager number to a staff member who was previously assigned from the
•
failed master.
The "OwnerOut" message appears as shown in Figure 2-22.
When you see this message, either press 1 to cancel the function you are performing, or
press 3 to carry out the function.
OwnerOut Cancel=1
Figure 2-22: OwnerOut Display
The "OwnerOut" Message
Take=3
2-23