Canceling a Call Placed from a Pillow Speaker
ProCare 6000 Operation Manual
Canceling a call placed from a pillow speaker is basically the same as canceling calls
placed from patient stations. See below.
Canceling a Normal Call
A normal call is automatically canceled when the base master answers the call or when
the patient station's CANCEL button is pressed.
Note:
If the call is placed on reminder, it must be canceled by pressing the CANCEL
button on the associated patient station.
When the call is canceled, this happens:
The CALL LED on the patient station and the green LED on the pillow speaker extin-
•
guish.
The associated corridor light extinguishes.
•
The call disappears from the base master display and the video display (if present).
•
The call disappears from stations where the system monitor function is active, and
•
from any staff/duty stations.
Canceling a Patient Normal, Patient Priority, or Patient Emergency Call
Either press the CANCEL button on the associated patient station, or register staff pres-
ence the room. When you do, this happens:
The CALL LED on the patient station and the green LED on the pillow speaker extin-
•
guish to confirm call cancellation.
The associated corridor light extinguishes.
•
The tone ceases at the base master.
•
The call disappears from the base master and the video display (if present).
•
The call disappears from stations where the system monitor function is active, and
•
from any staff/duty stations.
Pillow Speaker Operations
4-23