Flashing Display Codes - Dukane 4A3610B Operation Manual

Flashing Display Codes

ProCare 6000 Operation Manual
This section contains a quick reference list of the possible codes that may appear on the
right side of the base master display window.
Ac "Answered call"—Indicates a locking call that has previously been answered.
See Pending Call Display on page 2-1.
c> "Captured"—Your base master has been captured by another master. See
Capturing Base Master Coverage on page 3-4.
C< "Captured"—Your base master has captured, or is sharing calls with, another
master. See Capturing Base Master Coverage on page 3-4.
Dc "Delayed call"—A base master can be configured to delay the appearance of
calls with specific priorities. "Dc" appears if a call has been placed that is
delayed on your base master. The call appears on your base master when the
timeout period ends.
E "Errors"—Indicates errors at your base master. See Base Master Errors on
page 3-29.
Od "Off duty"—See Placing the Master On/Off Duty on page 3-3.
P "Programming"—Indicates that your base master is in programming mode.
Contact authorized personnel to deactivate the programming mode.
R_ "Reminder"—When this appears while the base master is idle, it indicates that
calls have been placed on reminder. When this appears next to the number of a
station that has called the base master, it indicates that the station has
automatically recalled the base master because its reminder was not canceled.
By default, the base master will display "RA" (amber reminder), "RG" (green
reminder), or "RR" (red reminder). However, if the staff level names have been
changed from amber, green, and red, the first letter of the new staff level names
are inserted after the "R." See Placing a Call on Reminder on page 2-16.
S "Secrecy"—When a station activates its secrecy function, the person at the
station will be able to hear you, but you will not be able to hear that person. See
Activating Secrecy and Deactivating Secrecy on page A-7.
Ts "Tone silence"—This indicates that the tones have been silenced at your base
master. See Silencing Pending Call Tones on page 2-22.
Flashing Display Codes
1-9