Pillow Speaker Operations
Pillow Speaker Operations
Placing a Normal Call from a Pillow Speaker
Placing a Staff Emergency Call from a Pillow Speaker
4-22
1. Press the large nurse call button. See Figure 4-16 on page 4-20. When you do, this
happens:
•
The green LED behind the translucent nurse call button illuminates to confirm call
placement.
The CALL LED on the patient station illuminates to confirm call placement.
•
The corridor light illuminates and flashes.
•
2. When the call is answered at the base master, this happens:
The red LED behind the nurse call button on the pillow speaker illuminates to
•
show that the patient can communicate with the base master attendant.
The CANCEL LED on the patient station illuminates to confirm connection.
•
The corridor light extinguishes.
•
The patient's entertainment audio is interrupted during the call.
•
3. The patient should speak toward the pillow speaker in a normal conversational tone.
4. If the call is placed on reminder, the green LED under the nurse call button flashes
slowly.
1. Register staff presence in the room. See Registering Staff Presence on page D-10.
2. Press the nurse call button on the pillow speaker twice in rapid succession.
Note:
The base master will show two calls when you do this—the staff emergency call, and
the type of call this station normally places. The latter call will cancel when the staff
emergency call is canceled.
The green LED behind the translucent nurse call button illuminates to confirm call
•
placement.
The CALL and STAFF EMERG LEDs on the patient station illuminates to con-
•
firm call placement.
The corridor light illuminates and flashes.
•
3. When the call is answered at the base master, this happens:
•
The CANCEL LED on the patient station illuminates to confirm connection.
The patient's entertainment audio is interrupted during the call.
•
ProCare 6000 Operation Manual