Assigning Base Masters, Staff, And Stations (Menu, 3); Capturing Base Master Coverage (Menu, 3, 1, 1); Figure 3-4: Capture Base Master Display; Figure 3-5: Scanning Captured Or Shared Base Masters - Dukane 4A3610B Operation Manual

Assigning Base Masters, Staff, and Stations (MENU, 3)

Assigning Base Masters, Staff, and Stations (MENU, 3)

Capturing Base Master Coverage (MENU, 3, 1, 1)

3-4
This menu selection allows you to capture another base master's coverage. This allows
you to respond to calls placed in the captured base master's coverage area. Calls can still
be answered at the captured base master.
Note:
When capturing another base master, all base masters currently captured by that base
master also transfer to your control.
1. Press MENU.
2. Press 3 to select Assignments = 3.
3. Press 1 to select Capture/Share = 1.
4. Press 1 again to select Capture Master = 1. Figure 3-4 appears:
_ _ _ _ _ _

Figure 3-4: Capture Base Master Display

5. Enter the ID number of the base master to capture (usually three to six characters).
If the ID is shorter than the number of spaces in the display window, press *ANS.
a. "Waiting for Resp" (response) and "Waiting for Data" appear briefly.
b. If the capture is successful, the Capture Scan mode is automatically initiated.
See Figure 3-5.
c. If the capture is not successful, an error tone sounds and you are prompted to
enter the base master ID number again. Return to step 5.
1000 Cover

Figure 3-5: Scanning Captured or Shared Base Masters

Capture
of 2
1
ProCare 6000 Operation Manual