Setting The Date And Time (Menu, 6, 2); Figure 3-30: Setting The Date Display - Dukane 4A3610B Operation Manual

Changing Tone, Date, and Time Settings (MENU, 6)

Setting the Date and Time (MENU, 6, 2)

3-28
This function allows you to set the base master's date and time.
Notes:
If your base master has an associated video display, you should still set the date and
time at the base master. The video display does not provide the date and time for the
base master.
The base master does not have a daylight saving function. You will have to manually
change the base master for daylight saving time.
1. Press MENU.
2. Press 6 to select Settings = 6.
3. Press 2 to select Set Date&Time = 2. The date window appears:
Mon_ _ Day_ _ Yr_ _

Figure 3-30: Setting the Date Display

4. Enter the month (a leading 0 must be entered for months 1 through 9).
5. Enter the date (a leading 0 must be entered for single-digit dates).
6. Enter the last two digits of the current year.
a. If you make a mistake, press #CNCL and repeat steps 4 through 6.
b. The time window appears (Hour _ _ Min _ _).
7. Enter the time in 24-hour format.
a. If you make a mistake, press #CNCL and repeat step 7.
b. The Day of Week window appears (Day of Week: _).
8. Enter the numeric equivalent to the current day of the week. (Sunday is 1, Monday is
2, and so on).
a. The day's abbreviation appears in the window (e.g., "Mon").
b. "Waiting for Resp" (response) appears briefly.
9. Press #CNCL repeatedly to exit the menu and return to the normal display. If you do
not, the base master automatically exits the menu after a programmed interval.
ProCare 6000 Operation Manual