Staff/Duty Stations
Staff/Duty Stations
CODE, STAFF and CANCEL Buttons
The DUTY Button
4-8
Staff/duty stations can be located in any area where staff members may be temporarily
working. The station can be preprogrammed to monitor the system, alerting the staff to
any patient calls by sounding a tone. The staff/duty station is shown below.
Figure 4-3: Model 4A2495 Staff/Duty Station
These three buttons are identical in function to those on the patient stations except the
STAFF button places a normal staff call rather than an emergency staff call. (Calls
placed from staff rooms are more likely to be routine communications than they are
emergencies.)
On staff stations, pressing this button activates the system monitor function. Pressing this
button again deactivates system monitor.
On duty stations, the system monitor function cannot be shut off. So, this button does
nothing.
The light on this button illuminates when system monitor is active.
CODE
STAFF
DUTY
CANCEL
ProCare 6000 Operation Manual